Showing 13–24 of 32 results

Out of stock

True L20.2 Pro Goalie Blocker

  • Lefevre 595 blocking face with bindingless design
  • High-Density foam construction throughout for pro level protection
  • Centered hand positioning for a balanced feel
  • Half-Piece Cuff design for increased wrist mobility
Out of stock

Vaughn Velocity V10 Pro Carbon Goalie Catcher

  • Made domestically in the USA
  • New wider and deeper T-web design
  • One-piece cuff and thumb
  • Easy close design with deep pocket area
  • Kevlar® padding on inner palm padding for greater protection
  • VAS Shock Shield palm and thumb base padding reduces hand stingers
  • Carbon molded palm and front thumb insert
  • Deeper back thumb profile for added hand comfort
  • Double layer reinforced finger perimeter edge
  • Pure composite in palm 40% lighter than plastic
  • Hex mesh inner lining for faster drying
  • HD foam in back pad over fingers
  • Finger tip deflecting rail with HD foams
  • Carbon reinforced T-top for greater web stability
  • Inner hand strap for retention and control
  • Cuff with no binding maximizes blocking surface
  • 45″ perimeter size
  • 60 degree angle palm break with easy flex design
  • Mesh finger stalls for comfort and heat dispersal
  • Added padding in wrist strap for increased comfort
  • Heat moldable for precise fit
Out of stock

Vaughn Velocity V9 Pro Carbon Goalie Catcher

  • VAS Shock Shield palm and thumb base padding
  • Carbon molded palm and front thumb insert
  • New more Defined break point for easy closing
  • Reinforced finger perimeter edge
  • New Pure composite used for increased performance
  • Two-piece cuff and front design
  • Hex mesh inner lining for faster drying
  • HD foam in back pad over fingers
  • Finger tip deflecting rail with HD foams
  • True Pro Spec construction
  • Carbon reinforced T-top
  • Carbon back thumb mold for added support
  • Inner hand strap for retention and control
  • Cuff with no binding maximizes blocking surface
  • 45″ perimeter size
  • Mesh finger stalls for comfort and heat dispersal
  • Neoprene inner hand control
  • Four section back hand padding for flexibility
  • Internal grip rail on inside palm for more closing grip
  • Full wrist strap allows tighter adjustment
  • Added padding in wrist strap for increased comfort
  • Heat moldable for precise fit
Out of stock

Vaughn Velocity V7 XR Pro Carbon Leg Pads

  • New V7 graphic with split front face for more color options
  • Solid inside knee drive block
  • Flatter style inner instep
  • Firm boot flex for higher stance
  • Solid top outside roll
  • Thin front face cushion foam
  • Elastic adjustable leg cradle strap
  • HD foam insert over outer ankle
  • Quick replaceable leg straps
  • 11″ pro width
  • Lightweight design and construction
  • Single break outside roll
  • Full pro core internal padding
  • Extended length inside knee cradle
  • Carbon fiber front reinforcement
  • Wide knee and leg cradle
  • Large coverage calf padding
  • Thin profile outer side panel
  • Higher scoop angle
  • New higher skate strap position
  • Thigh guard with knee cap
  • Pre-shape side profile for superior fit
  • Internal foam pro core padding provides for durability and consistent rebound performance
  • Over-squared inner thigh rise for improved five-hole coverage
Out of stock

CCM Extreme Flex 5 Pro Goalie Leg Pads

  • FLEX PROFILE: Outer Single Break + Pre-Curved Single Break Core. Maximizes flexibility while helping to close the 5-hole.
  • PAD FACE: CONTROL Rebound Technology + CONTROL Knee Rolls. Keep pucks controlled in tight. Molded and minimized knee rolls enhance rebound predictability.
  • CORE CONSTRUCTION: DUAL1TECORE Technology + Molded Pro Core. Lightweight dual flex profile for quicker transition into butterfly.
  • BOOT: Deep 90-Degree with Torsional Flex and Bungee Toe String System. Enhanced connectivity and flexibility for power pushes.
  • BOOT CHANNEL: Deep Soft. Added mobility and feel between the skate and pad.
  • LEG CHANNEL/ STRAPPING: Deep, Tight Fit with QMSS. Responsive feel for optimal reactivity and connection with the leg.
  • KNEE CRADLE: Recessed Foam with Removable Knee Cradle Wrap. Deeper knee cradle helps close the 5-hole.
  • KNEE RAISER / LANDING ZONE: 3D Grip/Injection-Molded EPP Foam with Raised Inner Edge Stabilizer. Excellent pad seal and stability with maximum impact absorption.
Out of stock

CCM E-Flex III Pro Leg Pads

New Features-

  1. Speed Skin– CCM’s proprietary synthetic material  increases the slide and glide on the pads and allows for greater power pushes
  2. Optimized Weight Distribution (OWD) Core– A slimmer thigh rise and the center of mass located below the knee makes this the lightest, most balance E-Flex pad ever
  3. QK5 Strapping– Optimized to allow greater velocity closing the 5-hole while allowing maximum rotation in the leg channel
  • OUTER FLEX
    The outer flex of the pad is a single break, allowing for maximum flexibility.
  • INNER FLEX
    The pad’s inner flex is pre-curved with a single-break core. Close that 5-hole with ease!
  • BOOT FLEX
    The Extreme Flex III leg pad’s boot flex is 90 degrees with torsional flex.
  • BOOT CHANNEL
    The deep, ultra soft boot channel allows for more freedom of movement.
  • LEG CHANNEL/CALF STRAP OPTION
    Featuring a tight fit one-calf strap, the Extreme Flex III leg channel/calf strap option is lightweight with a closer feel to the leg for better control.
  • KNEE STRAP SYSTEM
    Customize your fit at or below the knee with a single adjustable knee strap system.
  • KNEE CRADLE
    Deeper than its predecessor, the removable knee cradle wrap with recessed foam plays a big role in closing your 5-hole.
  • CORE
    The new lightweight, thin-molded foam core offers exceptional weight balance for a quicker transition into butterfly.
  • KNEE RAISER
    A 3D injection molded EPP foam helps seal the pad to the ice.
Out of stock

Brian’s OPTIK 2 Pro Goalie Catcher

  • HEX-AIR: The floating wrist pad features HEX-AIR for increased comfort and air flow.
  • DIGITECH PALM
  • E-FOAM TECHNOLOGY: Lightweight foam used throughout pro products.
  • SINGLE T
  • 40° LACED IN BREAK ANGLE: Laced in Break ensures a consistent break point.
  • TRUE 1 PC CUFF
  • ELASTIC THUMB STRAP: Elastic thumb strap works with the back hand to create a superior snap closure.
  • BOA SYSTEM: BACK-HAND: Tension keeps the hand secure over the break of the glove.
  • BOA SYSTEM: WRIST: Tension secures wrist pad as tight as desired without straps hanging sloppy out of the glove. The floating wrist pad ensures movement and wrist flex is fully attainable.
Out of stock

Brian’s G-Netik V Pro Goalie Leg Pads

  • PAD FACE – FLAT / LACELESS
  • OUTER ROLL – ANGLED
  • TOE TAPER – 84°
  • SLIDING EDGE – OPTI-SLIDE (PRIMO)
  • CALF STRAPPING – GNETIK V CALF WRAP
  • KNEE STRAPPING – DUAL OPTION KNEE STRAP
  • KNEE FLARE – REMOVABLE
  • INTERNAL STRAPPING – OPTIONAL UPPER CALF STRAP
  • PRO 2 KNEE PAD COMPATIBILITY – INTEGRATED OR INDEPENDENT
  • TOE STRAPPING – SMART CORD
  • BOOT STRAPPING – SMART BOOT
Out of stock

Brian’s OPTIK Pro Goalie Leg Pads

  • NEW (X) SMART STRAP
  • HEX-AIR MOLDED KNEE CRADLE
  • X-STATIC AIR-KNIT LEG CHANNEL
  • BEVELED BINDING-LESS THIGH
  • NEW SMART TOE STRAPPING
  • KNEE GUARD SYSTEM
  • LACE-LESS FACE
  • AIRKNIT & DEFENDER MATERIALS
  • FLAT-FACE / NO KNEE ROLL DESIGN
  • 32-38” AND CUSTOM SIZING AVAILABLE
  • CUSTOM AVAILABLE
Out of stock

CCM Premier II Pro Goalie Catch Glove

  • CUFF/THUMB: One piece to allow for maximum coverage.
  • BREAK ANGLE: 590 with a break angle that’s closer to the thumb.
  • PALM STIFFNESS: Game-ready fit with added D3O® protection. Includes an easy break-in with great protection.
  • WRIST STRAP: Webbing strap through the cuff for an easy and quick adjustment.
  • POCKET: Double straight tee helps track the puck.
  • FINGER GUARD: Raised HD foam finger padding for added protection.
  • CUFF/THUMB COMPOSITION: Injection molded PE and EPE foam. Impact absorption.
  • INNER PALM: 3/8″ felt/D3O®. Game-ready flex.
  • FINGER STALLS: Nash for a quick release.
Out of stock

Bauer Vapor 2X Intermediate Goalie Leg Pads

  • Core Insert: Dynamic Flex Core- featuring Curv composite thigh rise
  • Flex Profile: Flex point above and below the knee
  • Material: Synthetic Leather front face with CORTECH calf and knee
  • Boot Flex: Free-Flex 100 Degree Boot
  • Toe: Offset Monster HAL Toe Attachment
  • Leg Channel: ThermoCore Liner
  • Knee Landing: 45 Degree Stabilislide Knee Block- featuring AX Suede Quattro
  • Knee Wing: Adjustable Knee Wing
  • Strapping: Tune Fit Strapping System